0 Items

Research and Development

IC2 goes to great lengths to maximize performance of our sensors, which often translates into years of intense R&D to mature a technology until it’s ready to go. The products we manufacture are of great value to multiple government agencies (e.g. NASA, DOD) and are typically developed and matured under research grants and contracts via the Small Business Innovative Research (SBIR) and Small Business Technology Transfer (STTR) programs from the US Government. Through these programs, IC2 has been developing advanced technologies from the concept stage through advanced prototypes, then transitioning these technologies into commercial products.

These programs typically are executed in a 3 phase approach. Phase 1 (P1) being a proof of concept, Phase 2 (P2) prototype delivery, and Phase 3 (P3) commercialization of the researched product.

Advanced Phased Array Instrumentation and Processing for Engine Inlet Measurements – SBIR Phase 2

, ,

WIRA – Wireless Instrumentation for Rocket Applications – STTR Phase 1

,

Advanced Phased Array Instrumentation and Processing for Engine Inlet Measurements – SBIR Phase 1

,

Field-Deployable Wireless Data Acquisition System for Ground-Test Arrays – SBIR Phase P2E and P3

,

Flat-Package MEMS Fuselage Microphones for External Airplane Fluctuating Pressure Field Measurements – SBIR Phase 2

, ,

On-Board Low-Profile Skin Friction Sensor (OBeLiSk) – SBIR Phase 1

, , ,

Calibrated, MHz-Bandwidth, Dynamic Pressure Sensors for Quantitative Measurements in Hypersonic Flows – SBIR Phase 2

, , ,

High-Temperature, Flat-Pack Optical Pressure Sensors for Combustion Noise Measurement – SBIR Phase 2

, ,

Flat-Package MEMS Fuselage Microphones for External Airplane Fluctuating Pressure Field Measurements – SBIR Phase 1

, ,

MEMSonic Boom: Sensing and Acquisition for Sonic Boom Flight Research – SBIR Phase 1

, ,

Direct Wall Shear Stress Measurement for Rotor Blades – SBIR Phase 1

, ,

Improved Optical Five-Hole Probes for Three-Dimensional Flow Measurements – SBIR Phase 3

, ,

Fiber-Optic Vector Skin Friction Systems for Cryogenic Shear Stress Measurements – SBIR Phase 1

, , ,

High-Temperature, Flat-Pack Optical Pressure Sensors for Combustion Noise Measurement – SBIR Phase 1

, ,

Field Deployable Wireless Data Acquisition System for Ground-Test Arrays – SBIR Phase 2

, , ,

High-Bandwidth Dynamic Pressure Sensors for BOLT Model Testing – SBIR Phase 3

, ,

Calibrated, MHz-Bandwidth, Dynamic Pressure Sensors for Quantitative Measurements in Hypersonic Flows – SBIR Phase 1

, , ,

Fully-Differential Skin Friction Sensor Hardware and Calibration Method Development – SBIR Phase 3

, ,

Ultra-Low Profile, Flat-Packaged Microphones for In-Flight Aeroacoustic Measurements – SBIR Phase 1

, ,

Field Deployable Wireless Data Acquisition System for Ground-Test Arrays – SBIR Phase 1

, , ,

Capacitive Vector Skin Friction Measurement Systems for Complex Flow Fields – SBIR Phase 2

, , ,

Capacitive Vector Skin Friction Measurement Systems for Complex Flow Fields – SBIR Phase 1

, , ,

Fast Response, Fiber-Optic Micromachined Five-Hole Probe for Three-Dimensional Flow Measurements in Harsh Environments – SBIR Phase 2

, ,

High Channel Count, High Density Microphone Arrays for Wind Tunnel Environments – SBIR Phase 2

, ,

High-Frequency Calibration System for Sensors Used in High-speed Airflow Measurements – STTR Phase 1

, , ,

Calibration Advances to Increase Commercial Viability of TSV-Integrated Dynamic Pressure Sensing Arrays – SBIR Phase 3

, ,

High Channel Count, High Density Microphone Arrays for Wind Tunnel Environments – SBIR Phase 1

, ,

Fast Response, Fiber-Optic Micromachined Five-Hole Probe for Three-Dimensional Flow Measurements in Harsh Environments – SBIR Phase 1

, ,

MEMS Skin Friction Sensor – SBIR Phase 3

, ,

Low Profile, Low Frequency, Adaptively-Tuned Acoustic Liner – SBIR Phase 1

,

Miniaturized Dynamic Pressure Sensor Arrays with Sub-Millimeter (mm) Spacing for Cross-Flow Transition Measurements – SBIR Phase 2

, , ,

Highly-Resolved Wall-Shear-Stress Measurement in High Speed Flows – STTR Phase 2

, ,

MEMS Skin Friction Sensor – SBIR Phase 3

, ,

Miniaturized Dynamic Pressure Sensor Arrays with Sub-Millimeter (mm) Spacing for Cross-Flow Transition Measurements – SBIR Phase 1

, ,

Highly-Resolved Wall-Shear-Stress Measurement in High Speed Flows – STTR Phase 1

, ,

MEMS Skin Friction Sensor – SBIR Phase 3

, ,

Flexible, Compact Acoustic Transducer Arrays – SBIR Phase 2

, ,

Advanced Technology MEMS-based Acoustic Array – SBIR Phase 1

, ,

Flexible, Compact Acoustic Transducer Arrays – SBIR Phase 1

, ,

MEMS Skin Friction Sensor – SBIR Phase 2

, ,

MEMS Skin Friction Sensor – SBIR Phase 1

, ,

Micromachined Sensors for Hypersonic Flows – SBIR Phase 1

,

High Temperature MEMS Sensors for High-Frequency Shear Stress and Pressure Measurements – STTR Phase 2

,

High Frequency Surface Pressure, Shear Stress and Heat Flux Measurements for High Temperature Applications – STTR Phase 1

,

A MEMS Floating Element Shear Stress Sensor for Hypersonic Flows – STTR Phase 1

,

Mitigation of Aero-Optic Distortions by Active Flow Control – STTR Phase 1

,

Head Office

2405 NW 66th Court
Gainesville, FL, 32653

Book A Meeting

Schedule a Meeting Here

EMAIL US

sales@thinkic2.com