Opens in a new tab

Design and Characterization of a Micromachined Piezoelectric Microphone

This paper presents the development of a micromachined piezoelectric microphone for aeroacoustic measurement applications. The microphone consists of a circular diaphragm of silicon possessing a thin annular ring of piezoelectric material deposited at the edge of the diaphragm. The microphone was designed by combining a linear piezoelectric composite plate model with a lumped-element, electroacoustic model. Experimental characterization indicates a sensitivity of 0.75 µV Pa , a dynamic range of 47.8 169 20 − dB re Pa ( µ ) , and a resonant frequency of 50.8 kHz .

AIAA May 2005

Stephen Horowitz(1), Toshikazu Nishida(1), Louis Cattafesta(1), Mark Sheplak(1)

Interdisciplinary Microsystems Group, University of Florida (1)